Skip to content

Metal Gates in Leander, TX

Cedar Park Metal Gates is the Texas capital region's trusted expert in residential gate and fence work, specializing in dual swing gates, steel gates, and gated community entries. We offer driveway gate installation and gate operator installation.

Get a free gate estimate

Adding a Gate to a Newer Leander Home

Our team provides photo eyes retested at handover and keypad access control, delivering a clean fit to a builder-grade lot for both residential and commercial projects. Backed by 17 years in business and an 18-month workmanship warranty on welds, hinge set, footings and gate travel, our 1,483 completed projects include many first gates on builder-grade lots like these.

From the first measurement to the last photo eye test, our team handles every detail on the job. Serving Leander and neighboring Georgetown, Round Rock and Cedar Park, we fit each gate to the lot the builder left behind.

Request a free estimate, and our Leander location manager will measure the opening before anything is ordered.

Recent Gate Projects in Leander

Pair of satin black swing driveway gates open inward on a concrete apron at a limestone two-story home

Cole, Crystal Falls, Leander

Dual Swing Driveway Gates

Material
tube steel, satin black powder coat
Size
16 ft opening, two 8 ft leaves
Est. investment
$4,600 to $6,400
Est. duration
2 to 3 days

A wide hilltop drive with enough level room behind the line for both leaves

Two pairs of black steel gates for entry and exit lanes with a visitor pedestal on a curbed island

Desmond, Travisso, Leander

Gated Community Entries

Material
steel with black powder coat
Size
Entry and exit lanes, two gate pairs
Est. investment
$9,800 to $14,200
Est. duration
4 to 6 days

An association board replacing a pair of sagging entry gates without shutting out residents

Two deep grey tube steel gate leaves with a horizontal mid rail over a wide concrete drive

Anton, Mason Hills, Leander

Steel Driveway Gates

Material
galvanized tube steel, powder coat over zinc primer
Size
14 ft opening, two leaves
Est. investment
$4,300 to $5,900
Est. duration
2 to 3 days

An owner comparing aluminum and steel for a builder home with no gate

Investment and duration figures are estimates. Your written quote sets the final price and schedule.

What you can hold us to

What Stands Behind the Weld

17 yearsDrawing, welding and hanging gates from our Cedar Park shop
1,483Gates, fences, railings and entry systems completed
18-monthWorkmanship warranty on welds, hinge set, footings and gate travel
40 milesNorth to Georgetown, west to Lake Travis, south to Shady Hollow

Cole in Crystal Falls had a wide hilltop drive with enough level room behind the line for both leaves of a 16 ft opening, so we hung a dual swing pair. It was an estimated $4,600 to $6,400 job that typically took 2 to 3 days.

Anton in Mason Hills was comparing aluminum and steel for a builder home that came with no gate, and he chose a 14 ft opening of two steel leaves. That steel gate was an estimated $4,300 to $5,900 project and typically took 2 to 3 days.

Desmond's association board in Travisso replaced a pair of sagging entry gates without shutting out residents, with entry and exit lanes and two gate pairs. It was an estimated $9,800 to $14,200 job that typically took 4 to 6 days.

Why Newer Leander Homes Come Without a Gate

About 85% of Leander homes were built in 2000 or later (ACS 2024), the newest stock on our route, so most lots here left the builder with an open drive. A tube steel single swing drive gate with operator is estimated at $2,700 to $4,900 over 1 to 2 days, and a double leaf swing entry with operators is roughly $4,200 to $7,800 over 2 to 3 days. Leander's median owner-occupied home value is $506,200 (ACS 2024), and 73.4% of homes are owner occupied.

We check the drive for level room behind the line, the buried utilities and the grade before we pick swing or slide. Cole's hilltop drive had the room, which is why a swing pair worked there.

New matte black steel gate leaf hung on existing painted brick columns over a concrete drive

Materials for Leander Gates: Steel or Aluminum

Anton's comparison is the one most Leander owners make, and steel won for its stiffness at a 14 ft opening. Steel gates take a sandblast, zinc-rich primer and a baked powder coat, and a walkway or courtyard entry gate beside them is estimated at $650 to $1,450 over 4 to 8 hours. Where the drive is wide and flat, dual swing gates hang on ball-bearing hinges, and the posts go in on 48-inch gate-post footings with picket spacing held to no more than 4 inches for children and pets. Every leaf is 14-gauge tube pickets on 11-gauge rails with 3/16-inch wall gate posts, which is why it stays square for years.

Crystal Falls and Travisso Gate Rules

Crystal Falls is a master plan of about 5,000 acres that crosses the Travis and Williamson county line, and Travisso covers 2,118 acres. Both are association communities, so the drawing, finish color and post spacing go to the board before we build. Leander's Fire Marshal publishes Knox Box guidelines, so we confirm current text with the city on any powered gate.

Flat-top square tube security gate with tight vertical pickets beside a limestone column at dusk

Leander Gate Costs

A trackless cantilever gate in Leander is estimated at $6,200 to $9,800, and the crew typically finishes in 2 to 4 days. An operator added to an existing gate is roughly $1,900 to $3,700 over 4 to 8 hours, and a video intercom and keypad entry is an estimated $750 to $4,300 over 4 to 8 hours.

Fencing a Mason Hills side yard in ornamental tube steel is an estimated $52 to $83 per linear foot, usually 2 to 4 days of work. A track slide gate with rack drive is estimated at $1,700 to $4,800 over 2 to 3 days. Every Leander figure here is an estimate that can change with the grade of a Crystal Falls slope or the 14 ft width of a Mason Hills opening like Anton's, and the written quote prepared after our measure sets the final price and the schedule.

Why Choose Our Cedar Park Crew in Leander

Leander is the closest town on our route, typically 10 minutes from our Cedar Park shop, so the crew that measures your drive also sets the gate. With 1,483 projects and 17 years behind us, a Leander callback is a short drive, and the 18-month workmanship warranty on welds, hinge set and footings covers every Crystal Falls and Travisso job, with operators under the maker's own parts warranty.

Single steel gate leaf between new posts on poured concrete footings with cut limestone exposed along the drive

Service Areas Around Leander

We work Crystal Falls, Travisso and Mason Hills, and the same crew crosses into Georgetown and Round Rock the same week. Towns farther out are on our service area page.

Related Services for Leander Homes

Leander owners often pair a new gate with driveway gate installation, and association boards ask about gated community entries. A first gate with no power nearby can use solar gate operators. A walled front patio can take a courtyard gate.

Solid iron gate with cast scrolls freshly refinished in satin black at an older stone house

Leander Gate Questions

Can you add a gate to a builder home?

Yes, Anton's gate at Mason Hills was added to a builder home that came without one.

What does a swing gate cost in Leander?

A double leaf swing entry with operators is estimated at $4,200 to $7,800, and the written quote for your lot fixes the final figure.

Is steel better than aluminum for a driveway gate?

Anton chose steel for a 14 ft opening, and it is the stiffer frame.

Do Crystal Falls and Travisso need approval?

Both are association communities, so the board reviews the drawing first.

How long does an install take?

Most take an estimated 1 to 4 days, depending on the gate.

Can you replace a community entry?

Yes, Desmond's Travisso entry took an estimated 4 to 6 days.

Do you also serve Georgetown and Round Rock?

Yes, our crew often pairs a Leander job with a Georgetown or Round Rock one in the same week.

Request Your Leander Gate Estimate

Contact us today, and we will measure your Leander drive, check the association rules, and quote a double leaf swing entry with operators at an estimated $4,200 to $7,800 or a tube steel single swing drive gate with operator at roughly $2,700 to $4,900.

Your local contact

Who Runs Your Leander Job

Names, photos and stories are on our about page.

Location manager with a clipboard beside a black arched gate with a star medallion

Location manager covering Leander

Runs the Leander schedule from the first site measure to the final safety test.

Free estimate

Ready to Talk About Metal Gates in Leander?

Call us or send the form, and we will book a site measure and a written estimate.

Call (512) 631-0107

Calls only, we do not receive text messages.

Call (512) 631-0107