Skip to content

Metal Gates in Georgetown, TX

Cedar Park Metal Gates is the Texas capital region's trusted expert in residential gate and fence work, specializing in automatic driveway gates, sliding gates, and wrought iron fencing. We offer walk gate fabrication and gate operator installation.

Get a free gate estimate

Gates and Rails That Suit Georgetown's Sun City Households

Our team provides a photo eye at each pinch zone and keypad access control, delivering low-effort daily use for both residential and commercial projects. Backed by 17 years in business and an 18-month workmanship warranty on welds, hinge set, footings and gate travel, our 1,483 completed projects range from a courtyard walk gate to a multi-gate community entry.

From a one-hand latch on a courtyard gate to a full operator and photo eye package, our team handles every detail. Serving Georgetown and neighboring Leander, Round Rock and Cedar Park, we shape each gate and rail around how the household really uses it.

Request a free estimate, and our Georgetown location manager will walk the gate or rail with you before anything is cut.

Recent Gate and Railing Projects in Georgetown

Black ranch entry gate with a pole-mounted solar panel on a long caliche drive across flat pasture

Jerome, Andice Road acreage, Georgetown

Ranch Entry Gates

Material
2-inch square tube with black powder coat
Size
16 ft leaf, 900 ft from the house
Est. investment
$3,400 to $4,700
Est. duration
1 to 2 days

A horse property where trailers need a wide swing and the house is too far for a wire run

Hand-rubbed black square-bar stair railing on old limestone steps at a restored stone house

Felicia, Old Town, Georgetown

Iron Railings

Material
solid bar with a hand-rubbed black finish
Size
32 lf porch and stair guard
Est. investment
$2,500 to $3,700
Est. duration
6 to 10 hours

An older porch whose wobbly wood guard had rotted at the posts

Investment and duration figures are estimates. Your written quote sets the final price and schedule.

What you can hold us to

What Stands Behind the Weld

17 yearsDrawing, welding and hanging gates from our Cedar Park shop
1,483Gates, fences, railings and entry systems completed
18-monthWorkmanship warranty on welds, hinge set, footings and gate travel
40 milesNorth to Georgetown, west to Lake Travis, south to Shady Hollow

Felicia in Old Town had a porch guard whose wood had rotted at the posts. We replaced it with a square-bar ornamental stair or balcony guard at code height and a graspable handrail, an estimated $2,500 to $3,700 job that typically took 6 to 10 hours on site.

Jerome on the Andice Road acreage needed a wide single swing leaf with solar charging, a long-range remote and a buried exit sensor, because the house sits too far from the gate for a wire run. It was an estimated $3,400 to $4,700 project that typically took 1 to 2 days, the same window as any tube steel single swing drive gate with operator.

What a Sun City Home Asks of a Gate

A Sun City household needs a gate that latches with one hand, and an operator added to an existing gate does the heavy lifting. Sun City opened in spring 1996 as a Del Webb community on about 7,000 acres, and by April 2021 it held 8,488 homes and 15,700 residents, about 20% of Georgetown's population in 2020. A walkway or courtyard entry gate for that household gets a lever latch that catches without a slam, and a driveway leaf gets a soft-stop operator. Handrails get a profile a full grip can close around, which is why Felicia's Old Town guard has a graspable rail.

Yard fencing and any pool barrier with self-closing gate in a community like that sit under association review, so the drawing goes to the board before the shop builds anything.

Two deep grey tube steel gate leaves with a horizontal mid rail over a wide concrete drive

Georgetown Gate and Rail Costs

A walkway or courtyard entry gate in Georgetown is estimated at roughly $650 to $1,450 installed, and the crew typically finishes in 4 to 8 hours. An operator added to an existing gate is estimated at $1,900 to $3,700, usually another 4 to 8 hours. A video intercom and keypad entry runs an estimated $750 to $4,300 and typically takes 4 to 8 hours on site.

An ornamental stair or balcony guard is estimated at $68 to $132 per linear foot over 5 to 10 hours. A pool barrier with self-closing gate is typically $32 to $44 per linear foot over 1 to 3 days, and an ornamental tube steel fence line is roughly $52 to $83 per linear foot over 2 to 4 days. Harold at Wolf Ranch keeps six gates on a quarterly gate service plan, estimated at $540 to $660 per visit, or $90 to $110 per gate, with visits typically lasting 1 to 3 hours.

Gina on Airport Road had 320 linear feet of security fencing built over an estimated 3 to 4 days, a $19,400 to $25,600 project that shows how a long run is priced by the foot.

Georgetown's median owner-occupied home value is $429,100 (ACS 2024), and we price a plain ornamental tube steel fence line first, before any ornament. Every Georgetown figure above is an estimate that may change if a lot turns out steeper or wider than the drawing, and the written quote from our Sun City or Old Town visit is what sets the final price and the schedule.

Who Signs Off on a Georgetown Fence

The association or the city signs off before we build, and for a Sun City lot that usually means the association first. We send the drawing, the finish color and the post spacing, and we wait for the approval in writing. Georgetown's own fence height limits belong to the city, so we confirm the current text with the city before we quote a line.

Long run of black open-picket steel fence following the grade past agave and native grasses

Materials for Georgetown Gates and Rails

Georgetown households mostly choose between tubular steel gates for stiffness and cost and forged and cast iron work where an older home calls for a hand-forged iron fence, estimated at $88 to $128 per linear foot over 3 to 6 days. Every frame is sandblasted, primed with zinc-rich primer and powder coated at the coater, never field painted.

Why Georgetown Households Hire Our Cedar Park Crew

The same crew that measures your gate builds and sets it, and the drive from our Cedar Park shop is typically 24 minutes. About 69% of Georgetown homes were built in 2000 or later (ACS 2024), so a first replacement is the common job. Whether the job is a Sun City latch or an Old Town rail, the welds, hinge set and footings carry our 18-month workmanship warranty, and operators carry the maker's own parts warranty.

Flat-top square tube security gate with tight vertical pickets beside a limestone column at dusk

Service Areas Around Georgetown

We work Sun City, Old Town and the Andice Road acreage, and the same crew crosses into Round Rock and Leander the same week. Every other community we reach is listed on our service area page.

Related Services for Georgetown Homes

Georgetown homeowners often pair a new walk gate with a pedestrian entry gate or add gate operator installation to a gate they already own, and stair guards come from our iron railings crew. Older Old Town ironwork can get an old iron blast and recoat, estimated at $31 to $48 per linear foot over 1 to 3 days.

Single steel gate leaf between new posts on poured concrete footings with cut limestone exposed along the drive

Georgetown Gate Questions

What does a walk gate cost in Georgetown?

A Georgetown walk gate is estimated at roughly $650 to $1,450 installed, and the final figure comes only after we measure the opening.

Can a gate be made easy to latch for an older household?

Yes, we fit a lever latch and a soft-stop operator, so the gate closes and catches without a shove.

Do I need association approval for a fence in Sun City?

Yes, fence plans in a community like Sun City go to the association before we build, and we send the drawing for you.

How long does a gate operator install take?

Adding an operator to a gate you already own is an estimated 4 to 8 hours of work, at roughly $1,900 to $3,700.

Can you automate a gate that is far from the house?

Yes, a solar operator needs no trench, and Jerome's Andice Road leaf runs on one.

What is the height limit for a Georgetown fence?

The limit depends on the lot and the zone, so we confirm the current text with the city before we quote.

Do you also work in Round Rock and Leander?

Yes, Round Rock and Leander are on the same weekly route out of our Cedar Park shop.

Request Your Georgetown Gate Estimate

Contact us today, and we will walk your Georgetown gate or rail, talk through the latch and the operator, and quote the rail, plus a video intercom and keypad entry or a quarterly gate service plan if you want one.

Your local contact

Who Runs Your Georgetown Job

Names, photos and stories are on our about page.

Location manager with one hand on a keypad pedestal at a black steel fence

Location manager covering Georgetown

Runs the Georgetown schedule from the first site measure to the final safety test.

Free estimate

Ready to Talk About Metal Gates in Georgetown?

Call us or send the form, and we will book a site measure and a written estimate.

Call (512) 631-0107

Calls only, we do not receive text messages.

Call (512) 631-0107